Demolition Equipment at bauma CONEXPO 2026
15-18 September 2026 | India Expo Centre, Greater Noida | Hall 11, Stall K15
Compact Demolition Equipment for Spaces Conventional Machines Cannot Reach
Some demolition jobs happen in places where a full-size excavator will never fit. Inside a cement kiln where accretion has built up on the refractory lining. Below a furnace roof where slag needs to be cleared. Inside a chimney stack marked for partial teardown. In a tunnel where the clearance is measured in inches. These are the jobs JEHEL’s Boxer demolition machines are built for. At “bauma CONEXPO 2026” in Greater Noida, both the Boxer 35 and Boxer 50 will be on display at Hall 11, Stall K15.
Boxer 35
The smaller of the two models. Built for tight access demolition where floor space & overhead clearance are severely restricted. Ideal for kiln accretion removal & small furnace maintenance.
Boxer 50
The heavier model for more demanding breaking tasks. Higher hammer energy and a longer reach arm make it suitable for chimney demolition, tunnel lining removal, and thick concrete breaking.
Remote Operated
The operator controls the Boxer from outside the danger zone using a wired or wireless remote pendant. No one needs to be inside the confined space during breaking operations.
Compact Footprint
The Boxer’s narrow chassis and low profile let it enter doorways, manholes, and openings that conventional demolition equipment cannot pass through.
Electric Powered
Runs on electric power, which means no diesel exhaust inside enclosed spaces. Essential for indoor demolition, underground work & environments with ventilation constraints.
360-Degree Swing
The boom arm rotates a full 360 degrees on the chassis, allowing the operator to break material in any direction without repositioning the machine.
JEHEL’s Strength
In-house design team with technological excellence in Mechanical, Electrical, and Hydraulic design.
Covered 1 lac sq. ft. shop floor
Equipped with all modern manufacturing facilities
R&D team with modern 3-D analysis software for VA/VE
Why Choose JEHEL?
Reinventing oneself is the only way forward and we, at Jehel, take this very seriously to keep our clients happy
JEHEL - Your Hydraulic Material Handling & Rock Breaking Expert
Contact Us
Manufacturing Expertise
State of the art manufacturing facility helps us to deliver tailored solutions for every material handling and rock breaking requirements.
Cutting-Edge Technology
Our design and R&D team uses modern 3D design and analysis software for VA/VE, ensuring reliability and safety at site.
Reliable Support
Our 25 service engineers cater worldwide, ensuring smooth operations and optimal performance.
Competitive Pricing
High-quality engineering solutions offered at competitive rates, ensuring value and affordability for our clients.
Customized Solutions
Tailored Engineering Solutions Addressing Your Material Handling Requirements.Look Into JEHEL’S Latest
Hydraulic Machines
Enhance your construction endeavours with our extensive range of high-quality hydraulic machinery and equipment, carefully curated to empower your projects' success.
Frequently Asked Questions
Visit JEHEL at bauma CONEXPO INDIA 2026
Event : bauma CONEXPO INDIA 2026
Dates : 15-18 September 2026
Venue : India Expo Centre, Greater Noida, Delhi NCR
Timing : 10:00 AM - 6:00 PM (all 4 days)
JEHEL Booth : Hall 11, Stall No. K15
Entry : Pre-registration required
Contact : 9051617609| info@jehel.com
Demolition Equipment at bauma CONEXPO 2026
Demolition in industrial settings is rarely about tearing down an entire building. More often, it is about removing accretion from inside a cement kiln, stripping refractory lining from a furnace wall, or breaking out a section of tunnel lining for repair. These are confined space jobs that conventional excavators cannot access and manual labour handles too slowly and too dangerously.
JEHEL’s Boxer demolition machines are purpose-built for this category of work. The Boxer 35 and Boxer 50 are compact, electric-powered, remote-operated robotic breakers that enter through manholes, doorways, and narrow openings. Once inside, the 360-degree swing arm positions the hammer against the target surface and breaks it down piece by piece. No diesel exhaust, no operator inside the danger zone.
At “bauma CONEXPO 2026” in Greater Noida, both Boxer models will be on display at Hall 11, Stall K15. Visitors can inspect the chassis dimensions, boom articulation, hammer size, and power system. JEHEL’s engineers will discuss application selection: which model fits kiln work, which handles chimney teardown, and how the machine is transported and positioned at site.
JEHEL manufactures the Boxer range at its Kolkata facility alongside its stationary rock breakers, which share the same core hydraulic engineering. For companies managing scheduled shutdowns, kiln turnarounds, or structural maintenance projects, the exhibition is a chance to evaluate the equipment before the next outage window. Visit Hall 11, Stall K15 between 15 and 18 September 2026.